The secret of door and window hardware installation!

In home decoration, the installation of door and window hardware is crucial. Small hardware not only affects the performance of doors and windows, but also the life of doors and windows. So, how to install door and window hardware correctly? The following is a detailed explanation of the installation process of door and window hardware, so that you can easily master the installation skills!
🚪 Installation of handles
Handles are commonly used hardware in doors and windows. Their installation should be ergonomic and convenient for daily use. During installation, make sure that all handles are consistent and neat, and the screw length matches the thickness of the cabinet door and drawer surface. When drilling holes with an electric drill, the hole diameter must be consistent with the screw diameter to ensure a stable installation.
🔗 Installation of door hinges
Doors usually install two hinges with a length of 100mm. If it is a solid door or a concave and convex door, three hinges or two hinges with a length of 125mm are required. The hinges must be installed flat and stable, and the screws must be tightened appropriately when fixing to avoid loosening or over-tightening to cause damage.
🔒 Lock installation
The door lock should be installed in a reasonable position, and the handle should be 900-1000mm above the ground. When installing, first fix the lock body and the lock tongue, and make sure that the lock tongue plate is flush with the door edge. After closing the door, you need to locate the position of the strike plate, then install the strike plate, and make sure it is flush with the door frame. Pay attention to details when installing the lock to ensure stability and safety.