Maintenance Precautions For Bathroom Hardware

First, the model, specification and performance of the selected hardware accessories must comply with the relevant provisions of the current national standards and be matched with the selected bathroom sanitary ware for matching use.
Second, the sliding support hinges on the window must not be made of aluminum alloy materials. It is better to use stainless steel materials because the hardness of stainless steel is better than that of aluminum alloy.
Third, the shower doors of general bathroom shower rooms are all pushed and pulled. If it is a sliding door with a width of more than 1m, or a double-layer glass shower door, it is more suitable to set up double pulleys, or use rolling pulleys to ensure that the shower door is convenient and unobstructed.
Fourth, after the installation of bathroom hardware, pay attention to prevent rust and corrosion. Open and close lightly in daily use to prevent hard opening and hard closing, which may cause damage.
Fifth, when installing hardware with fastening screws, a metal lining must be installed inside, and the thickness of the lining should be at least twice the pitch of the fastener. It shall not be fastened to plastic profiles, and non-metallic lining shall not be used.